Table of Contents
Advertisement
F8 Search the input message forward for "xx" character from the
current cursor position, leaving the cursor pointing to the "xx"
character. Syntax
= F8xx where xx stands for the search character's hex value for
its ASCII code.
Refer to the
beginning on page A-4 for decimal, hex and character codes.
F8 Example: Send bar code data that starts after a particular
character
Search for the letter "D" in bar codes and send all the data that
follows,
including the "D." Using the bar code above:
Command string: F844F10D
F8 is the "Search forward for a character" command
44 is the hex value for "D"
F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as: DEFGHIJ
<CR>
Search backward for a character
F9 Search the input message backward for "xx" character from the
current cursor position, leaving the cursor pointing to the "xx"
character.
Syntax = F9xx where xx stands for the search character's hex
value for its ASCII code.
Refer to the
on page A-4 for decimal, hex and character codes.
Search forward for a non-matching character
E6 Search the input message forward for the first non-"xx" character
from the current cursor position, leaving the cursor pointing to
the non-"xx" character. Syntax = E6xx where xx stands for the
search character's hex value for its ASCII code.
Refer to the
on page A-4 for decimal, hex and character codes.
E6 Example: Remove zeroes at the beginning of bar code data
AS-9600 User Guide
ASCII Conversion Chart (Code Page 1252),
ASCII Conversion Chart (Code Page 1252),
ASCII Conversion Chart (Code Page 1252),
beginning
beginning
5 - 8
Advertisement
Table of Contents
