Running-In Period; Maintenance; Troubleshooting; Safety Instructions - WILSON AUDIO Raptor 7 User Manual

Ensure that positive terminals on the speakers (marked + and coloured red) are connected to
the positive output terminal on the amplifier and that negative terminals on the speakers
(marked – and coloured black) are connected to the negative output terminal on the amplifier.
Incorrect connection can result in poor imaging and loss of bass.
Keeping the loudspeaker cables away from AC outlets will reduce interference.
WARNING: Do not plug into a power source and mains outlet, this could result in electric
shock or fire.

Running-in period

We recommend a running-in time of your new loudspeakers of approximately 15-20 hours
at normal listening level before you decide on the final positioning, during the running-in
time the driveunits will settle in and perform as intended.

Maintenance

WILSON loudspeakers are finished using high quality material. Cleaning the loudspeakers
should be done with a damp cloth. Chemical cleaners should be avoided, as they may
damage the finish.
Avoid touching the drive units, and do not use the loudspeakers as a flower, coffee or
drinks table (risk of water or liquids being spilled into the loudspeaker).
Wilson Raptor loudspeakers require no regular maintenance.

Troubleshooting

If no sound, check;
• that all cables are connected properly to both loudspeaker and amplifier
• that the connected amplifier is ON and volume is turned up
• that the loudspeaker gets a signal from the amplifier - check tone on most av-receivers.

Safety Instructions

WARNING – read before use
• Please store this instruction manual for future reference.
• Do not plug into a power source and mains outlet, this could result in electric shock or fire.
• Place the unit on a solid surface.
• Do not use this product near water or moisture.
• To prevent risk of fire avoid liquids and objects enter the product.
• Do not block any ventilation openings.
• Do not install near any heat sources, such as radiators, heat registers, stoves or other
appliances that produce heat.
• Servicing is required when the product has been damaged.
• Do not attempt to service this product yourself.
• Contact the manufacturer to be refered to an authorized service center near you.
EN
4