Solving Software Problems; Solving Sound Problems - Compaq Armada 1500 User Manual

Solving Software Problems

Most software application or installation problems occur because
of one or more of the following conditions:
Application was not installed correctly.
Memory was not allocated correctly.
Conflict exists between applications.
Problem
Insufficient memory to
run application.

Solving Sound Problems

Some common causes and solutions for sound problems are listed
in the following table.
Problem
Computer beeps after you
turn it on.
Computer does not beep
after the Power-On Self-
Test (POST).
Servicing the Computer
To get help from Compaq Customer Support or to find a Compaq
authorized reseller or service provider location, call one of the
numbers in the "Worldwide Telephone Numbers" in Appendix A.
Your Compaq authorized reseller or service provider is available to
answer your questions, install optional equipment, and service your
computer.
If you take the computer in for service, remember to provide the
power-on password or, if possible, disable the password in
Passwords Properties prior to delivery to the service provider. Refer
to the online Compaq Reference Guide for additional information.
Software Problems and Solutions
Probable Cause
System ran out of
memory for the
application.
Sound Problems and Solutions
Possible Cause
This is normal; it
indicates successful
completion of the POST.
System beeps are
turned down.
Solution
Check the application
documentation for memory
requirements.
Install additional memory.
Solution
No action is required.
Use the volume control on the
keyboard (or Fn+F5 hotkeys and
the arrow keys) to turn up the
volume.
Troubleshooting 10-23