Analog Output; Pc Interface - ADWA AD1000 User Manual

• To return to normal measurement mode, press
CAL at any moment during calibration.
• If the calibration procedure is ended after the
600.0 mV point is confirmed, the meter returns
to normal measurement mode and stores a 2-
point calibration data.

ANALOG OUTPUT

For the full range of each measurement, the analog out-
put varies from - 2000 to 2000 mV.

PC INTERFACE

Data transmission from the instrument to the PC can be
done with the AD9316 Windows
(optional). AD9316 also offers graphing and on-line help
feature.
Data can be exported to the most popular spreadsheet
programs for further analysis.
To connect your instrument to a PC, use a standard USB
cable. Make sure that the instrument is switched off and
plug the cable to the instrument USB port and to the PC
USB port.
compatible software
®
68