Logging/Storing - ADWA AD1000 User Manual

LOGGING / STORING
This feature allows the user to log automatically pH &
Rel mV or ISE & Rel mV measurements, together with
the temperature reading. All logged data can be trans-
ferred to a PC through the USB port.
The maximum logging space is 1000 record locations
(samples). This can be divided from 1 up to 50 lots (one
lot can use all the free space). The lot ID can be from 1
to 99 (after 99 it restarts from 1). A maximum of 50 lots
can be stored, even if there is free space available.
Note: When the logged lots are more than one, the to-
tal number of samples can be less than 1000,
because the logging memory is divided in pages
of 20 samples each.
The logging interval can be set from 5 seconds to 180
minutes (see "Setup" section for details). Up to 50 record
locations are also provided for the log-on-demand.
LOG-ON-DEMAND
(LOGGING/STORING THE CURRENT DATA)
To store the current reading into the
instrument memory, press STORE
from normal measurement mode.
50