Hold - ADWA AD1000 User Manual

HOLD

To freeze a stable reading on the LCD, press HOLD
key from normal measurement mode.
The "Auto" and "H" tags will blink on the LCD until the
reading stabilizes.
When the reading is stable, the "Auto" and "H" tags
stop blinking and the reading is frozen.
Press HOLD key again to return the normal measure-
ment mode.
Note: Pressing RANGE the instrument will skip to the
displayed range, without leaving the HOLD
mode. The STORE key also holds HOLD mode.
Pressing MEM RCL key, SHIFT and then
SETUP or GLP, the instrument leaves the HOLD
mode and performs the selected function.
58