Advertisement
Device layout
Wireless charging
surface
Charger port
Wireless charging covers and chargers
are sold separately.
Using the wireless charger
1. Connect the charger to the wireless charger.
Then, place a supported mobile device in the
centre of the charging surface. (
2. When the mobile device is fully charged,
remove the mobile device from the wireless
charger.
Use only Samsung-approved chargers
(5 V/2 A, 5.3 V/2 A, and 9 V/1.67 A).
•
The charger should remain close to the
electric socket and easily accessible
while charging.
•
The socket-outlet shall be installed
near the equipment and shall be easily
accessible.
•
If you use the wireless charger in areas
with weak network signals, you may
lose network reception.
Indicator light
Fan vent
1
)
3
Advertisement
