Network Interface Controller - NEC Express5800 System Configuration Manual

SYSTEM CONFIGURATION GUIDE
2x2.5-inch Hot Plug Drive Cage Kit(SAS/SATA, Rear)
Riser card for slot 3 or 6 with one PCIe 3.0 x16 slot,
including 2x 2.5-inch drive bay to install into slot 1 to 2 or
4 to 5
NOTE:

To use PCI slot 4 to 6, dual-processor configuration is required.

If the N8154-98 2x2.5-inch Hot Plug Drive Cage Kit (SAS/SATA, Rear) is installed on 2nd Riser, it is not allowed to install 3rd Riser.
Refer to 4.1.4Optional Rear Drive Bay" in detail.
3rd PCI Riser Card Kit
Product Name / Description
3rd Riser Card Kit(1xPCI, 1xGPU Installation Kit)
Riser card for slot 7 with one PCIe 3.0 x16, one
power connector for GPU, and support bracket for a
dual-slot PCI card
3rd Riser Card Kit(2xPCI)
Riser card for slot 7 to 8 with two PCIe 3.0 x8 slots
NOTE:

Dual-processor configuration is required.

2nd PCI Riser Card Kit (N8116-62/-67/-56) is required to install 3rd Riser Card Kit.

If you order two N8154-95 2x2.5-inch Hot Plug Drive Cage Kit (SAS/SATA/PCIe SSD), N8154-117 Internal DVD Drive Installation
Kit is required. If one N8154-95 2x2.5-inch Hot Plug Drive Cage Kit is selected with N8154-117 Internal DVD Drive Installation Kit,
the Drive Cage is preferentially installed in N8154-117 Internal DVD Drive Installation Kit mounted on Drive Cage 1 (Option). If one
N8154-95 2x2.5-inch Hot Plug Drive Cage Kit is selected without N8154-117 Internal DVD Drive Installation Kit, the Drive Cage can
be installed in Rear Drive Cage6 instead of 3rd PCI Riser Kit.

The 3rd PCI Riser Card Kit is not available if the N8154-95 2x 2.5-inch Drive Cage Kit is installed into slot 7 to 8.

If N8154-98 2x2.5-inch Hot Plug Drive Cage Kit (SAS/SATA, Rear) are selected in 2nd Riser, 3rd Riser Card can't be added to
Riser Card.

Network Interface Controller

Category
LOM Card 1GbE
10GbE
NEC Corporation
–
NEC Express5800/R120h-2M
Product Name / Description
Quad Port 1000BASE-T LOM Card
Broadcom BCM5719
PCIe 2.0(x4)
Quad Port 1000BASE-T LOM Card
Intel Ethernet Controller I350
PCIe 2.0(x4)
Dual Port 10GBASE-T LOM Card
QLogic 57810S
PCIe 2.0(x8)
Dual Port 10GBASE-T LOM Card
Intel X550
PCIe 3.0(x4)
Dual Port 10GBASE SFP+ LOM Card
Intel Ethernet Controller X710
PCIe 3.0(x8)
NOTE:
- N8104-189 SFP+ Module is required to connect with an optical cable.
- Up to two SFP+ Modules can be installed.
Revision 5.0 – January 2018
Figure
N8154-98
Part Number
N8116-78
N8116-81
Part Number
N8104-171
N8104-172
N8104-173
N8104-175
N8104-176
27