Power Cable For Gpu - NEC Express5800 System Configuration Manual

SYSTEM CONFIGURATION GUIDE

The USB Memory Kit cannot be installed if M.2 SATA Solid State Drives are installed.

To use VMware vSAN, combination of vSAN certified hardware is required.

If you are using VMware vSAN and cannot boot from USB Memory Kit, please order M.2 SATA SSD.

Power Cable for GPU

Product Name / Description
Graphics Card Power Cable (8Pin. Type A)
Power cable for video card (PCIe 8Pin)
Graphics Card Power Cable (8Pin. Type B)
Power cable for video card (CPU 8Pin)
Graphics Card Power Cable (8+6Pin)
Power cable for video card (8Pin + 6Pin)
Graphics Card Power Cable (6+6Pin)
Power cable for video card (6Pin + 6Pin)
NOTE:

To install GPU cards, the riser card with a power connector for GPU, High Performance CPU Heatsink, and High Performance Fan
kit must be installed. Refer to PCI Riser Card /PCI Card, High performance CPU heatsink, and Fans in detail

Cable varies depending on the GPU card installed. Please check the specifications of the GPU card and select the cable.

For default factory configuration
NEC Corporation
–
NEC Express5800/R120h-2M
Revision 5.0 – January 2018
Part Number
K410-386(00)
K410-387(00)
K410-388(00)
K410-391(00)
36