Network Interface Controller - NEC Express5800 System Configuration Manual

SYSTEM CONFIGURATION GUIDE
NOTE:

If N8116-53 1st Riser Card (2xPCI + 2xM.2 SATA SSD) is selected, 1x2.5-inch Drive Cage (SAS/SATA, rear) can't be installed.
7.3

Network Interface Controller

Category
LOM Card
Adapter
NEC Corporation
–
NEC Express5800/R120h-1M
3rd Riser Card Kit(1xPCI + 1xGPU Installation Kit)
Riser card for slot 3 (physically occupied from slot 2 to slot 3) with one
PCIe 3.0 x16 slot and one GPU power connector, Including two power
cables for GPU
NOTE:
- The Riser Card Kit is supported in dual-processor configuration.
N8154-92 1x2.5-inch drive cage (SAS/SATA, rear) can't be installed
-
when N8116-53 1st riser card (2x PCI + 2xM.2 SATA SSD) is selected
Product Name / Description
1GbE Quad Port 1000BASE-T LOM Card
Broadcom BCM5719
PCIe 2.0(x4)
Quad Port 1000BASE-T LOM Card
Intel Ethernet Controller I350
PCIe 2.0(x4)
10GbE Dual Port 10GBASE-T LOM Card
QLogic 57810S
PCIe 2.0(x8)
Dual Port 10GBASE-T LOM Card
Intel X550
PCIe 3.0(x4)
Dual Port 10GBASE SFP+ LOM Card
Intel Ethernet Controller X710
PCIe 3.0(x8)
NOTE:
- N8104-189 SFP+ Module is required to connect with an optical cable.
- Up to two SFP+ Modules can be installed.
- Twinax cable can be installed.
25GbE Dual Port 25GBASE SFP28 LOM Card
Cavium 45604
PCIe 3.0(x16)
NOTE:
- N8104-190 SFP28 Module is required to connect with an optical cable.
- Up to 2 SFP28 Modules can be installed.
- Twinax cable can be installed
1GbE Dual Port 1000BASE-T Adapter
Broadcom BCM5720 Gigabit Ethernet Controller
PCIe 2.0(x1)
Dual Port 1000BASE-T Adapter
Intel Ethernet Controller I350
PCIe 2.0(x4)
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
Quad Port 1000BASE-T Adapter
Broadcom BCM5719 Gigabit Ethernet Controller
PCIe 2.0(x4)
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
Quad Port 1000BASE-T Adapter
Intel Ethernet Controller I350
PCIe 2.0(x4)
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
10GbE Dual Port 10GBASE-T Adapter
QLogic 57810S
PCIe 2.0(x8)
Revision 7.0 – July 2018
N8116-54
Part Number
N8104-171
N8104-172
N8104-173
N8104-175
N8104-176
N8104-177
N8104-178
N8104-180
N8104-179
N8104-181
N8104-182
22