NEC Express5800 System Configuration Manual page 30

Hide thumbs Also See for Express5800:
Table of Contents

Advertisement

SYSTEM CONFIGURATION GUIDE
Only one SAS JBOD Enclosure can be connected to one RAID controller.
4Kn sector drives are not supported with the RAID controller.
One battery backup unit must be installed per system.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of
becoming multiple hard drives failure during the RAID rebuilding process.
It is recommended to set RAID array configuration drives less than eight in order to minimize the risk of becoming multiple hard
drives failure.
Fibre Channel / SAS Controller
It is connected to tape device, device expansion unit and iStorage. The controller varies by different device connected
Category
Fibre Channel
SAS
NEC Corporation
NEC Express5800/R120h-2M
Product Name / Description
Fibre Channel Controller (1ch)
Cavium QLogic, QLE2690
16Gb/s, Optical, PCIe 3.0 x8
NOTE:
-
The controller is qualified with NEC Storage M series, OS support
WS2012R2 and WS2016
-
The controller is qualified with NEC Storage T series, OS support
WS2012R2, WS2016 and RHEL7.3
Fibre Channel Controller (2ch)
Cavium QLogic, QLE2692
16Gb/s, Optical, PCIe 3.0 x8
NOTE:
-
The controller is qualified with NEC Storage M series, OS support
WS2012R2 and WS2016.
-
The controller is qualified with NEC Storage T series, OS support
WS2012R2, WS2016 and RHEL7.3
Fibre Channel Controller (1ch)
Broadcom, LPe31000
16Gb/s, Optical, PCIe 3.0 x8
NOTE:
-
The controller is qualified with NEC Storage M series, OS support
WS2012R2 and WS2016.
-
The controller is not qualified with NEC Storage T series
Fibre Channel Controller (2ch)
Broadcom, LPe31002
16Gb/s, Optical, PCIe 3.0 x8
NOTE:
-
The controller is qualified with NEC Storage M series.
-
The controller is not qualified with NEC Storage T series
Fibre Channel Controller (1ch)
Broadcom, LPe32000
32Gb/s, Optical, PCIe 3.0 x8
NOTE:
-
The controller is qualified with NEC Storage M series.
-
The controller is not qualified with NEC Storage T series
Fibre Channel Controller (2ch)
Broadcom, LPe32002
32Gb/s, Optical, PCIe 3.0 x8
NOTE:
-
The controller is qualified with NEC Storage M series
-
The controller is not qualified with NEC Storage T series
SAS Controller
12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0 x8
NOTE:
-
Support tape connection via Device Expansion Unit only
SAS Controller
LSI SAS9300-8e Host Bus Adapter
12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0(x8)
NOTE:
-
Support for connection to NEC Storage T series only.
-
The controller is not qualified with NEC Storage the Storage M series or
Tape connection via Device Expansion Unit.
Revision 5.0 – January 2018
Part Number
N8190-165
N8190-166
N8190-163
N8190-164
N8190-171
N8190-172
N8103-197
N8103-184
30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R120h-2mN8100-2562fN8100-2563fN8100-2564fN8100-2565f

Table of Contents