Health O Meter 2210KL User Instruction page 12

OPERATING INSTRUCTIONS (CONT)
Motion Detection
Motion detection uses a proprietary technology that automatically provides accurate weight
measurement when there is motion on the tray.
If there was considerable motion during the weight measurement, motion detection will activate after
seven seconds and "AVERAGE WT" will be displayed along with the weight measurement and
"PRIOR WT" (Fig. 8).
PRIOR WT
AVERAGE WT
gram
Figure 8: Motion detected during weighing
Battery Life Indicators
This scale has excellent battery life with most users getting more than two years from a single set of
batteries. Your battery longevity will vary with the frequency of use and the length of the Auto-Off
timer. To help ensure you are never without the use of your scale, the display shows the amount of
charge left in the batteries.
• Battery Icon: Located in the bottom left corner of the LCD display is an icon of a battery. With
new batteries, all three segments will be dark. As the batteries become depleted, the segments will
turn off.
• Flashing Battery: When the battery icon is empty and the frame is flashing, replace the batteries.
(Fig. 9).
NOTE: Properly dispose of old batteries. Install six (6) new alkaline C-cell batteries. Do not mix new
and used batteries.See page 7 for battery replacement instructions.
Figure 9: Battery Indicators
12