Behringer MODEL D User Manual page 19

19
MODEL D User Manual
5. In the Command Window, enter the SysEx command to be sent to the
MODEL D. For PITCH Calibration, the command is:
F0 00 20 32 00 7F 0E 00 00 00 F7
6. In the Command Window drop-down menu, select Send SysEx.
7. The SysEx message will be sent to the MODEL D, and it will then be in its
PITCH Calibration mode.
8. If you wanted, you can use the SAVE AS command in the Command Window
drop down menu to save the SysEx message as a file on your computer for
later use.
9. Then use the LOAD command in the Command Window drop down menu to
recall the SysEx message from a file on your computer.