Oki C810 Maintenance Manual page 115

Oki Data CONFIDENTIAL
Item Adjustment
11 Consu- Copying of consumable part counters
mable Drum counter (Y, M, C, K)
counter Fuser counter
mainte- Belt counter
nance Toner counter (Y, M, C, K)
function Adjustment purpose: When half-used
consumable parts are diverted to another
printer, the value of each consumable
part is copied.
12 Destina- Sets or checks the (CU) destination,
tion/ PnP device identification and USB
information identification.
setup
13 Sending of a Sends a specified file.
specified file
14 Indication Verification of the current values of
of consu- consumable part counters.
mable part
counters
15 Check of Indication of the set values of each menu
menu set set on the printer (CU).
values
16 Check Verification of the Mac address and
of printer versions of various F/Ws of the printer.
information
17 Check of Verification of the information of CPU and
mounted memory installed on the printer (CPU).
CPU/
memory
values
44072903TH Rev.1
Operation on
Section
Operator Panel
No. of the
(Section No.
mainte-
corresponds to
nance Utility
the Mainte-nance
Operation
manual)
Section Invalid operation 18 Test pint
2.4.2.2.4
16 Print
Section Section 5.4.3
2.4.1.2.9
17 CPU/
Section Unavailable
2.4.1.2.15
Section Subsect. 5.1 18 Test print
2.4.1.3.1
Section Menu Map print
2.4.1.3.2 (See User's 19 Switch scan
Manual.)
Section Menu Map
2.4.1.3.3 Printing (See 20 Motor clutch
User's Manual.)
Section Menu Map
2.4.1.3.4 Printing (See 21 Color
User's Manual.)
22 Density
Item Adjustment
Execution of local print function
and transmission of specified files.
Adjustment purpose: Verification of
individual operation of the printer and
transmission of downloaded files.
Checks the Mac address and each
information firmware version.
check
Checks the information on the CPU and
Memory memory installed on the printer (CU).
value check
Executes the local print function and
sends a specified file.
Purpose: To check the printer on a
stand-alone basis and send a download
file.
Executes the switch scan test.
test Purpose: To check each sensor for
proper operation.
Executes the motor clutch test.
test Purpose: To check each item, such as a
motor or clutch, for proper operation.
Executes the color registration
registration adjustment test.
adjustment
test
Executes the density adjustment test.
adjustment
test
5. MENTENANCE MENUS
Operation on
Section
Operator Panel
No. of the
(Section No.
mainte-
corresponds to
nance Utility
the Mainte-nance
Operation
manual)
Section Each local print
2.4.1.4.1 (See System
Specification.)
Section Print a
2.4.1.3.3 configuration
report (Menu
Map) (refer to
User's Manual).
Section Print a
2.4.1.3.4 configuration
report (Menu
Map) (refer to
User's Manual).
Section Perform local
2.4.1.4.1 printing
(refer to System
Specification).
Section
2.4.1.5.1
Section
2.4.1.5.2
Section
2.4.1.5.3
Section
2.4.1.5.4
115 /