Selecting A Lens; Inserting A Lens - Barco Orion 1080 Safety And Users Manual

4.6 Selecting a lens

The projector is delivered without a lens, enabling you to select a lens according to your desired image size and
projection distance. The projector uses a bayonet mount system to precisely fix the lens in place. The lenses are
manual, meaning zoom, focus and iris adjustments are done by hand manually. Lens shift is motorized (horizon-
tally and vertically).
Use only original lenses or lenses that are approved for use with this projector.
A protection lid is mounted on the projector lens opening to protect the interior of the projector from
dust and damage. The protection lid must always be in place whenever there is no lens mounted on the
projector!
The protection lid must be removed before attaching a lens!
The projection lenses are supplied with protection caps on both the entry and exit sides. Please keep the
caps on until mounting the lens on the projector!
4.6.1

Inserting a lens

1. Remove the protection lid on the projector by turning the lid anti-clockwise until it
comes loose
2. Remove the protection lids from the lens
3. Insert the lens, making sure the red line marking on the lens points straight up towards the top of the
cabinet. If the lens does not enter on the first attempt, retract the lens and try again from a slightly different
angle. Do not use force!
4. When the lens enters all the away in, firmly twist the lens clockwise until it clicks into position
Figure 4-4. The protection lid
Figure 4-5. Projection lens release button
Protection lid
Release button
20