Call Anonymously; Direct Call - VTech GEMINI User Manual

Call anonymously

Your telephone number may be made available to the other party when you make a phone call (ask your service provider about the
availability and costs of this CLIP service).
However, you may wish to hide your own telephone number from the person you are calling. In this case, your telephone number will
not be displayed on the called party's telephone. Please note that this is a supplementary network service and subject to availability
from your service provider.
If you activate this mode than it will only apply to the next telephone call you are making. The mode "call anonymously" is
automatically disabled after you have made the call (whether successful or not).
Your handset is in standby mode.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
After pressing the OK key you are requested to enter the phone number of
the party you want to call (or use the option softkey
phonebook or other dialling lists).
Press the talk key to dial this number.
When dialling, the Vtech GEMINI automatically inserts the pre-defined
network control code for this service before the telephone number (this is also
shown on the display).
•
Note
Ask your service provider about the availability and any charges of this
service.
•
Make sure that you have programmed the correct network control code
for this service (refer to page 45).

Direct Call

You may switch your Vtech GEMINI into Direct Call mode. In this mode the handset starts dialling a pre-defined telephone number
whenever you press any key on the handset. This mode may be helpful for parents with small children. In case when the parents are
away, the children can be told that they can reach their parents (or neighbours) simply by pressing any key on the handset. Of
course the corresponding telephone number must be programmed in the handset by the parents before.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Enter the system PIN code and press the «OK» softkey.
Select the menu entry
The display shows
the destination telephone number. Confirm by pressing the «OK» softkey.
The handset returns to the standby mode. The display
shows Direct Call
Whenever you press any key, the handset automatically starts dialling the
previously entered telephone number.
Call anonymously
Direct Call and press the «OK» softkey.
Direct Call On
Enter number:
and you are requested to enter
to indicate that direct dialling is activated.
to access the
and press the «OK» softkey.