Base Station Front View - VTech GEMINI User Manual

Numerical keys for entering telephone numbers as well as text.
..
•
When pressing the 1-key for approx. 2 seconds (long-press), the
network mailbox number is dialled directly.
•
In dialling mode, when pressing the 0-key for approx. 2 seconds
(long-press), a dialling pause is inserted between digits
Asterisk (or star) key to enter the "asterisk" symbol. Pressing this key
and holding it for approx. 2 seconds switches the ring tone on/off. While
editing names or writing text, pressing this key switches between
uppercase and lowercase characters.
Hash (or pound) key to enter the "hash" symbol.
Pressing this key and holding it for approx. 2 seconds locks/unlocks the
keypad.
Open the VIP phonebook.
R – or Flash key.

Base station front view

The vtech GEMINI base station is equipped with a multi-functional paging key used for finding (paging) the handset(s) (see below)
and registering handsets on to the base station (refer to page 11).
Paging key
Charging cradle
for the handset
Finding the handset (paging)
You can easily find a (misplaced) handset by pressing the paging key on the base station. All handsets which are logged on to this
base station will start ringing for 60 seconds enabling you to quickly find the handset(s) again.
Stop the ring tone on the handset by pressing the talk key
Note A handset will not start ringing if the handset is not registered to the base
station. For more information how to register the handset to the base station
refer to page 11. The handset will not ring if switched off or the batteries are
flat.
.