Writing Sms Messages - VTech GEMINI User Manual

Select the menu entry
Select the menu entry
Select the gateway of your choice and press the «OK» softkey:
SMS Gateways 1
SMS Gateways 2
SMS Gateways 3
The display shows the current number of this service centre. Edit this number
and finish by pressing the «OK» softkey. The display briefly
Entry stored !
shows
stored.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....
•
Note
Caution: Sending and receiving SMS messages only works properly
when the service centre telephone numbers are entered correctly!
•
Check carefully whether you need to specify the network access code
in case your Vtech GEMINI cordless telephone is connected to a PBX
system.

Writing SMS messages

Your Vtech GEMINI supports SMS messages with a maximum length of 160 characters.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Select the menu entry
The display shows
message (refer to page 32 for text editor details) and press the «OK» softkey
when finished.
Press the
available characters are listed on page Error! Bookmark not defined..
The display shows
where you want to send the SMS message to. You can enter the telephone
number directly or fetch it from e.g. the phonebook, redial list, etc...
Note If you are receiving an incoming call while you are writing an SMS
message, then writing of the SMS message is interrupted, your handset
starts ringing and you can answer the incoming call. The (incomplete)
message is stored in the list of outgoing messages and can be completed
and send later.
After having entered the SMS text and the destination number you have two options:
•
Store the SMS in the list of outgoing SMS messages
•
Send the SMS to the specified destination
SMS Messages
SMS Gateways
(sending and receiving SMS messages)
(receiving only)
(receiving only)
. The new service centre number is now
Messages
and press the «OK» softkey.
SMS Messages
Write new SMS
Enter text: . Enter the text for this new SMS
key to toggle between uppercase and lowercase characters. All
Enter number:
and press the «OK» softkey.
and press the «OK» softkey.
and press the «OK» softkey.
and press the «OK» softkey.
. Enter the telephone number