Making Internal Calls; Callback If Busy - VTech GEMINI User Manual

Note The entire Call Log is also deleted when the base station is reset (refer to
page 43).

Making internal calls

If you have more than one handset logged on to the base station then you can make internal telephone calls between these
handsets. Such internal calls are free of charge since such calls are routed over the base station but not over the telephone network.
Dialling an internal number
Press this softkey to open the list of available internal destinations (i.e. other
handsets which are logged on to the base station).
Select the internal destination you want to call from the list
(e.g. Intern 2
You may end the internal call by pressing the talk key
•
Note
If you are having an internal conversation then it is not possible to set-
up another (second) internal call between other handsets.
•
The list of available internal destinations includes only other handsets
which are logged on to the base station.
•
To find out which handsets are logged on to the base station, press the
paging key on the base station. On all logged on handsets you will
hear a ring tone and the handset displays read

Callback if busy

Many service operators offer a supplementary network service named "Call Completion Busy Subscriber" (CCBS). When the person
whom you are calling is engaged in another conversation (you will hear the busy tone), then you may activate this service. The
telephone network will start to monitor the other party's telephone line. When the other party becomes free, your own telephone
starts ringing and when you answer, the network automatically sets-up the connection.
Activating callback if busy
You are trying to call someone. The called party is already engaged and you
hear the busy signal.
Open the options menu by pressing the «Options» softkey.
Select the menu entry
Depending on the service provider you may hear a spoken message.
Press the talk key to return to the standby mode and wait for the network to
reconnect you.
•
Note
Ask your service provider about the availability and any charges of this
service.
•
Make sure that you have programmed the correct network control code
for this service (refer to page 45).
•
This service will usually remains active for a limited period of time (e.g.
30 minutes). Ask your service provider for details.
) and press the «OK» softkey to dial this number.
again or by placing the handset back in the base station.
Callback and press the «OK» softkey.
Paging...