Wall Mounting; Connecting The Base Station - VTech VT650 User Manual

VT650 User Guide A/W 30/5/02
6
Locating & Connecting the Base Station & wall Mounting
The position in which you place the base station can have an effect
upon the range and performance of your VT650 telephone.
Observe the following points:
• The base must be near to both a telephone socket and a mains
electricity socket.
• Avoid placing base too close to large metal objects such as filing
cabinets, radiators or electrical appliances. This can impair the
range and sound quality.
• The power of the signal depends on the position of the base. The
higher the better. An upstairs room near to the centre of the
house is preferred.
Buildings with thick internal and external walls may impair
transmission of signals to and from the base.

CONNECTING THE BASE STATION:

Plug the lead from the adapter into the correct socket on the base
unit. Plug the power adapter into a convenient 13 AMP power
socket. Turn on the mains power. The base is now ready to receive
the handset with the batteries for charging. Charge for at least 12
hours BEFORE you attempt to connect your telephone to the
telephone line.
2:06 pm Page 7

WALL MOUNTING:

Remove the handset from the base station. Clip on the supplied
bracket and ensure that the fixing screws and plugs are secure before
attempting to mount the base station to them. Once mounted check
that the base station is stable and replace the handset.
Power Supply
Wall Mounts
Wall Mounts
7
Telephone Line