Advertisement
CHARGING YOUR H1
CHARGING THE DEVICE
• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V ~ 240V; 50, 60 Hz).
• Ensure the light on the charger is lit GREEN.
• Align and connect the 3-pin charging cable into the charging port
of the H-1. DO NOT FORCE THE CHARGER INTO THE CHARGE PORT, AS
THIS MAY CAUSE THE PRONGS TO BREAK OFF OR PERMANENT
DAMAGE TO THE CHARGE PORT. Broken prongs and/or damage to
the charge port, are not covered by warranty.
• The charging indicator light should change to RED, indicating that
your device is now being charged.
• When the RED indicator light on your charger turns to GREEN, then
your device is fully charged.
• A full charge may take up to 3.5 hours.
• After fully charging your H1, unplug the charger from your device
and from the power outlet.
BATTERY CARE / MAINTENANCE
BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 3.5 hours
Voltage: 36V
Initial Capacity: 4.0 AH
Working Temperature: 14°F - 140°F
Charging Temperature: 32°F - 113°F
Storage Time: 1 year
Storage Temperature: 77°F
Storage Humidity: 45% - 75%
BATTERY MAINTENANCE
The lithium-ion battery is built into the device. Do not disassemble the
device to remove the battery or attempt to separate it from the
device.
• When charging the device, please use the enclosed 3-pin
charging cable or otherwise ensure that the battery charging
conditions are met.
• Do not connect or attach the device or the battery to a power
supply plug or directly to a car's cigarette lighter.
27
Advertisement
