Advertisement
• Hardware/Software Version - Display the hardware and software
versions of your H1. These fields will only appear when connected to
your H1 scooter.
• Diagnostics - Run a diagnostic check on your H1 and stay informed
of any hardware, software and electrical issues that may need to be
addressed.
5) SKILL/SAFETY MODES
Cycle between 3 different skill modes. Each mode has a different top
speed and sensitivity. The mode will only change if you are not using
your H1 scooter.
• Beginner Mode - This mode is recommended for first time Hover-1
scooter users. In this mode, the sensitivity and top speed are very low.
• Intermediate Mode - This mode is recommended for users that are
comfortable using Hover-1 scooters but are not ready for full speed
and extra sensitive controls. In this mode, the sensitivity and top speed
are moderate.
• Expert Mode - This mode is recommended for everyday Hover-1
scooter users. In this mode, the sensitivity and top speed are set to the
maximum setting.
NOTE: Skill and safety mode must be selected. The Hover-1 will default
to "Beginner" mode if another mode is not selected.
6) STANDBY MODE
"Standby Mode" allows you to put your H1 into a low-power standby
state. Your H1 cannot be used while in standby. You must disable
standby mode before you can ride the H1. When in standby mode,
the button will say "Power On". Press "Power On" to disable the
standby mode.
Please note, if you have your "Auto Shutdown Time" set, your H1 will
turn off completely at the specified time. You will be unable to power
it back on from the App. You will have to physically press the power
button on your H1 to turn it back on.
Power On
Standby Mode
12
Advertisement
