SOMFY Connect UAI Plus Quick Start Manual
Universal automation interface (uai) plus
Hide thumbs
Also See for Connect UAI Plus:
- Integration manual (16 pages) ,
- Programming manual (15 pages)
Related Manuals for SOMFY Connect UAI Plus
Summary of Contents for SOMFY Connect UAI Plus
- Page 1 S omfy Connect Universal ™ Automation Interface (UAI) Plus Quick Start Guide Ref #1870272 For the commissioning, control and integration of Somfy Digital Network™ (SDN) motorized products over IP or RS232...
- Page 2 Basic SDN system components, including motorized products and bus power and data distribution products, must be properly installed and fully operational prior to the installation of the Somfy Connect™ UAI Plus. Each Somfy Connect™ UAI Plus can configure and control up to 255 motors. Only 1 Somfy Connect™ UAI Plus per SDN system. SYSTEM REQUIREMENTS: a.
- Page 3 1. NOTE: Extend one of the two DIN mounting ears with a small screwdriver to enable the device to snap onto the din rail Connect • Connect SDN communication wire to Port 2 of the Somfy Connect™ UAI Plus and an open device port on the SDN system or the power/ data output port of the Bus and Sensor Station Power Supply.
- Page 4 Over 270 million users worldwide enjoy the more than 160 million motors produced by Somfy. During the past 45+ years, Somfy engineers have designed products for both the commercial and residential markets to motorize window coverings such as interior shades, wood blinds, draperies, awnings, rolling shutters, exterior solar screens and projection screens.
Need help?
Do you have a question about the Connect UAI Plus and is the answer not in the manual?
Questions and answers