Troubleshooting - Bush CSPK200 Instruction Manual

Product support
Help is always at hand

Troubleshooting

Problem
No power
No Sound
Sound is distorted
Sound is distorted from
LINE IN/AUX input
The remote control is not
working
Bluetooth connection with
an android device does not
output sound.
Unit switches off after 20
minutes of inactivity
26
Product support
Reason(s)
Power cable not connected
to wall socket.
Power socket is not
switched on.
Volume is too low.
LINE IN/AUX/BT source
volume is too low.
Microphone/Guitar input
volume is too low.
Volume is too high.
LINE IN/AUX source
volume is too high.
The battery is flat
Some older android builds
may have incompatabilty
issues.
Auto standby mode in
operation.
Solution(s)
Make sure the plug is
connected.
Switch the power on.
Increase the volume.
Increase the output volume
of the LINE IN/AUX/BT
source.
Increase the volume of
either mic or guitar input.
Reduce the volume.
Reduce the output volume
of the LINE IN/AUX source.
Replace the remote control
battery
Use the volume buttons on
the remote control only to
bypass the incompatability.
This unit is designed to
enter STANDBY mode
automatically after 20
MINUTES of inactivity.
Press the STANDBY button
to wake the unit.