Contents You’ll soon be enjoying your new Tower Speaker. Safety information Safety information It all begins here, with your instructions. Don’t worry, there’s Getting to know your Tower Speaker nothing too technical coming up. Just simple, step-by-step guidance to get you up and running quickly. Sound good? Then Ready? Let’s begin let’s get started.
Safety information Safety information Important - Please read these instructions fully before Important - Please read these instructions fully before installing or operating installing or operating Power source Ventilation • Only use the power supply that came with the product. Using an unauthorised power Do not block or cover slots, holes or openings on the product by placing on soft supply will invalidate your guarantee and may irrecoverably damage the product.
Page 5
Safety information Important - Please read these instructions fully before installing or operating • Do not attempt to open the product. This product does not contain any user serviceable parts. Unauthorised handling of the device may damage it and will void your warranty.
Getting to know your Tower Speaker Getting to know your Tower Speaker You’ll be up and running in no time You’ll be up and running in no time Ready? Let’s begin... Please read these instructions carefully. They contain important information which will help you get the best from your product and ensure safe and correct installation and operation.
1. Connect the mains power lead into the socket on the back of the Tower Speaker. 4. When found, your Tower Speaker will be displayed as ‘Bush Tower’ . Select the device 2. Plug the power adaptor into the mains power wall socket and switch on.
Getting to know your Tower Speaker You’ll be up and running in no time Adjusting the volume On the Tower Speaker or on the Remote control: • Press and release the button to increase the volume in steps. • Press and hold the button to progressively increase the volume.
Check that your Tower Speaker is in Aux in mode. If you are not already in Aux in mode, connect, go to the Bluetooth connectivity settings on your device and select Bush press and release the Mode button on the Tower Speaker or on the Remote control until Tower to reconnect.
2.402GHz-2.480GHz Bluetooth version: 2.1 + EDR Pairing name: Bush Tower Profiles HFPV1.5, A2DPV1.2, AVRCPV1.4, HSP1.2, GAVDP1.2, IOP This page is left intentionally blank section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Product support Product support Help is always at hand Help is always at hand Troubleshooting Help and assistance If you require any technical guidance or find that your Tower Speaker is not operating as No sound / power: intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.argos-support.co.uk •...
Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don’t forget to register it with us today so we can provide you with our best possible after-sales service and •...
Need help?
Do you have a question about the HT-700 and is the answer not in the manual?
Questions and answers