Using A Multi-Handset System - Binatone IDECT X3 User Manual

Change handset ringer melody
1 Press the menu button.
à The display shows Calls lists.
2 Use the UP/ or DOWN/ button to select Handset.
3 Press the button.
à The display shows Handset >Ringtone.
4 Press the button.
Press the button to select External Call.
5
Use the UP/ or DOWN/ button to choose the ringer melody
6
you want (from 1 to 10), e.g. Melody 7.
7 Press the button for OK.
à The display shows Ringtone Saved.
Press the HANG UP/C button to go back to idle mode.
8

Using a multi-handset system

If you have an iDECT X3 multi-handset system, you already have
more than one handset registered to your base unit. You can register
additional handsets - up to five per base unit. Each handset's number
(1 to 5) is shown on the display.With two or more handsets, you can
make intercom calls from one handset to another, transfer an outside
call from one handset to another, shuttle between an outside call
and an intercom call, or set up a three-way conference call. Only one
handset can be connected to the outside line at once. If you try to
make a call while another handset is already on line, you'll hear
Busy tone.
Make intercom calls
Intercom
1 Press the INTERCOM button on any handset
Intercom
(i.e. handset 1).
à The display shows Internal Call.
2
Use the digit buttons to enter the handset number you want to
call. (e.g. Handset 2)
Handset 2 will ring.
3 Press the handset 2's PHONE
call.
4
Press the HANG UP/C button to go back to idle mode.
22
button to answer intercom