Uniden iGO CAM 80 Owner's Manual page 18

Using the App
Uniden iGO App allows you to control the iGo Cam 80 via WiFi. You can
easily preview, browsing files, playback and transfer the files in the SD card
into your mobile phone. The app also allows you change some of the device
setting.
The iGo Cam 80 WiFi hotspot if off by default and you will need to turn it on to
allows your mobile phone to connect to it.
Connect your mobile phone to your iGo Cam 80 within a range
of 10m.
NOTE
When the iGo Cam 80 WiFi is turn on, there is no way to access
the device menu settings. You will need to turn off the WiFi by
press and hold the EMERGENCY button.
NOTE
1. Search and download the Uniden iGO App from the App Store for iOS
devices or Play Store for Android devices.
2. Turn on the WiFi hotspot of the iGo Cam 80. The SSID and the SSID
and password will be displayed on the screen.
3. Go to your mobile phone WiFi setting and connect to the iGo Cam 80
hotspot. The SSID usually starts with GS63.... and the default password
is 12345678.
There are 4 tabs at the bottom of the app screen which consists of Video,
Photo, Folder and Settings.
Video
While the device is recording, you need to stop the recording in the app to
access other tabs.
While the device is recording, you can take a quick snapshot or turn on/off
audio recording.
If a rear camera is connected, you can switch camera views.
Photo
Tap the Photo icon to enter Photo Mode. You can change the photo resolution
and take a snapshot.
Folder
Tap the Folder icon to enter Playback Mode. You can tap to the video file
UNIDEN iGO CAM 80
18
Vehicle Recorder