Uniden iGO CAM 80 Owner's Manual page 11

Record Menu Settings
Please note, you cannot access the Menu Settings while the
device is recording. To access the Menu settings, you will need
to stop recording by pressing OK.
NOTE
Press MENU button to open the Record Menu Settings. Press MENU again
to open the General Settings Menu. Press MENU once more to exit from the
Menu settings.
Press the relevant UP and DOWN keys to scan through the options, under
each menu setting. Press OK to select the required option.
In the Record mode, press MENU to open the Record Menu.
Setting
Video Resolution
Image Quality
Loop Recording
Audio Recording
Date Stamp
GPS Stamp
Exposure
UNIDEN iGO CAM 80
Description
Set the recording resolution. The options available
are, 2880x2160P 24, 1920x1080P 60, 1920x1080P
30, 1280x720P 120, 1280x720P 60, 1280x720P 30
and FHD P30+VGA P30. Higher resolutions will give
you a sharper image, but take up more memory on
the card.
Choose between the options - Super Fine, Fine,
Normal - to define the detail in the recordings.
Use this option to set the length of each video clip. If
you choose the option 'Off' then the recorder will not
loop record and the files will not be overwritten on
the micro SD card.
Use this setting to enable or disable audio recording.
Opt to have the date and time displayed on the
recordings.
Opt to have the GPS coordinates displayed on the
recordings.
Set the brightness sensitivity for better effect in
different lighting condition.
11
Vehicle Recorder