Uniden iGO CAM 80 Owner's Manual page 12

Anti-Flicker
Camera Alert
Overspeed Alert
Motion Detection
Park Mode
WDR
G Sensor
Viewing Mode
UNIDEN iGO CAM 80
Change depending on the electrical power frequency
in your area (Default setting is 50Hz and you may not
have to change this setting).
Set the alerts distance when there is a fixed Speed/
Red Light/Red Light-Speed or Average Speed
Camera.
Enable this option to receive alerts when over the
selected speed limit.
Enable this setting to allow the unit to record only
when it detects movement.
When the car engine and the unit is turned off, this
mode enables the unit to turn back ON automatically
and create a 30sec locked recording when G-Sensor
picks up vibration. Unit must have sufficient battery
power remaining in order to record. The G-Sensor
must also be turned on.
Turn on/off the Wide Dynamic Range (WDR) feature
to improves the overall exposure throughout your
entire image.
This functions helps protect/lock video files in case
of a sudden movement/collision. You can change the
sensitivity level of the G-sensor.
Choose to either have Live view or the speedometer
displayed on the LCD.
12
Vehicle Recorder