iHome iBT297 Instruction Manual page 9

Setting the Clock
Press and hold the Time Set Button on the bottom of the unit for 3 seconds until the
1.
clock display flashes and a beep sounds.
2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make
sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the
display.
3. Press the Time Set Button to confirm the time. The year will flash. Press the – or + Buttons
to adjust to the current year.
4. Press the Time Set Button to confirm the year. The month will flash. Press the – or + Buttons
to adjust to the current month.
5. Press the Time Set Button to confirm the month. The date will flash. Press the – or + Buttons
to adjust to the current date.
6. Press the Time Set Button to confirm the date and exit clock setting mode. 2 beeps will
confirm clock setting is complete.
TIP: To toggle the clock display between standard 12 hour time and 24 hour ("military") time
display, press the Alarm 1 Button or Alarm 2 Button while the display is flashing during
clock setting.
Setting and Using the Alarms
This unit features dual alarms which can be set to di erent times and alarm sources. Each is set
in the same way. Instructions are given as "Alarm Button"; use Alarm 1 Button or Alarm 2 Button
to set respective alarms.
Note: Each step must be completed while display is flashing or setting will time-out with any
changes saved.
Using the
8
iBT297