Planet ICA-230 User Manual page 3

2.1.2 Rear Panel
DC Power Jack
Audio Output Jack
Audio Output Jack
DC Power Jack
LAN Socket
Factory Default
Reset
Audio-out Jack allows this device to output audio or alerting sound.
The input power is 12VDC.
NOTE Only use the power adapter supplied with ICA-230/M230.
Otherwise, the product may be damaged.
The LAN socket is a RJ-45 connector for connections to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port
built N-Way protocol can detect or negotiate the transmission speed of
the network automatically. Please use Category 5 "straight through"
cable to connect the ICA-230/M230 to a 100Mbps Fast Ethernet
network switch or hub. The LAN socket is compliant with IEEE802.3af
standard PoE interface.
NOTE If you need to connect the ICA-230/M230 to PC or notebook
directly, you should use cross over cable instead.
This button is hidden in the pinhole. Please refer to the Appendix A in
manual for more information.
Factory Default
4
LAN Socket