Accepting Call Waiting - Polycom 331IP User Manual

At this point you will hear a dial tone and you can enter the number of the person to add to the conference
call. Press the Submit soft key. As soon as the called party answers, you can add it to the conference by
pressing again the Conference soft key. To end the conference call, simply hang up the receiver ending the
call with both parties, which will remain connected between each other.
7.Call waiting
Requirement: Call waiting must be activated as a feature from your telephone service provider. If a call is
received during another call in progress, the display shows the name and number of the caller. At this point
you can decide whether or not to accept the new call while putting the first one on hold.

7.1 Accepting call waiting

Select the name or number of the incoming call using the
the Answer soft key. At this point the first call is put on hold and you are connected to the second one.
You can switch between calls using the
currently on hold and by pressing the Resume soft key.
To end the current call, simply press the End Call soft key. To return to the previous call on hold press the
Resume soft key after selecting it with the
7.2 Declining call waiting
Press the Decline soft key. The caller will hear a busy signal.
8.Static deviation
Static deviation is defined as the deviation of the incoming call always on another number.
8.1 Enabling static deviation
To activate unconditional call forwarding press the
key and scroll to Features and confirm by pressing the
up/down directional key and pressing
up/down directional key to select the second call
up/down directional key.
key using the
key.
up/down directional
5/9