Advertisement
Example:
Send Command:"~01WR".... Read watchdog timeout value.
Response:" !01WD0F"....... . Command valid, set the watchdog timeout is "0F"..1.6 Sec.
8-22.System stand by (Host OK!)
*If watchdog is in enable , send the Host Ok!"command before watchdog timeout (B) the
watchdog will re-count, PWR LED will flashing after watchdog timeout.
8-23.Read power on/safe value
19
Advertisement
Need help?
Do you have a question about the TRP-C28 and is the answer not in the manual?
Questions and answers