Trycom Technology TRP-C28 User Manual page 17

8-17.Change the module's name
Example:
Send command:"~01OABCDE"..... Change the TRP-C28M's name become to "ABCDE".
Response:"!01"....... . Command valid.
Then send the command "$01M"...read the TRP-C28M's name.
Response:"!01ABCDE"....... .The TRP-C28M's name is "ABCDE".
8-18.Set the module's LED operating mode
~IDLEDA(CHK)(cr)
~
ID
Syntax
A
description
CHK
(cr)
Response !IDON/OFF
?ID(CHK)(cr)
Example:
Send command:"~01LED0"..... Turn off all LED, when logic "1" ON.
Response:"!01OFF"........Command valid.
8-19.Enable watchdog and set the timeout value
First Leading code
Address of setting module 00-FF(HEX)
A=0 Turn on all LED when DIO enable off.
A=1 Turn off all LED when DIO enable on.
Checksum
Carriage return
Command valid
Command invalid
17