Page 2
BX 11 BX 11 | Active wheelchair Active wheelchair | Index Introduction 4.7.2 Adjusting the brakes 1.1. Signs and symbols 4.8. Centre of gravity, seat angle and seat height Important safety instructions 4.8.1. Adjusting the drive wheel 2.1. General safety instructions 4.8.2.
This instruction manual contains all necessary information on ope- rating the versions of the BX 11 wheelchair with leg rest (art. no.: Important! This is especially useful information on 1612013501) or with a footrest (art. no.: 1612003501).
BX 11 BX 11 | Active wheelchair Active wheelchair | 2. Important safety instructions • Avoid running against obstacles (steps, kerbs) without braking or moving down steps. 2.1. General safety instructions • Avoid using on uneven, loose surfaces. • When getting into or out of the wheelchair, apply both parking brakes.
BX 11 BX 11 | Active wheelchair Active wheelchair | 2.2. Anti-tip wheels (optional) 2.5. Indications for use The anti-tip wheels prevent the wheelchair from tipping backwards. Inability or severely impaired ability to walk due to Note that driving with anti-tip wheels on terraced terrain, lift platforms and ramps is only possible to a limited extent.
B+B, as manufacturer and solely responsible party, hereby declares 3.1. Inspection on delivery that the wheelchair BX 11 complies with the requirements of the EC Directive 93/42. All B+B wheelchairs are subject to a proper final inspection in our house and receive the CE mark.
BX 11 BX 11 | Active wheelchair Active wheelchair | 3.2. Type plate and serial number 3.3. Contents The type plate (Fig. 01) and serial number are located under the seat. After receiving the goods, please check the contents for completeness CE Sticker &...
| Active wheelchair Active wheelchair | 4. Assembly/Adjustments 4.1 Folding and unfolding Delivery Your new B+B wheelchair is delivered fully assembled and folded in an original B+B carton. To prevent damage during transport, attachable mounting parts are delivered separately (Fig. 5). Unfolding Position your wheelchair next to you.
• Remove the two socket screws (4 mm Allen screws) from the leg The BX 11 (art. no.: 1612003501) is equipped with a continuous support tube (inside and outside), and adjust it to the desired footplate.
4.3.1. Skirt guard them forward until they lock into place. The BX 11 is equipped with aluminium skirt guards (Fig. 19) as stan- dard. These are secured to the frame on the front and back. The height of the skirt guard must be readjusted if the seat position or tyre size is changed.
First release the button and move the armrest until it locks in the next possible position. The push handles of the BX 11 can be put in a position that is comfortable for the accompanying person (Fig. 25). The backrest Pivoting the side parts away height can be adjusted as well.
4.6. Adjustable seat and back 4.7. Brakes 4.6.1. Seat slack The BX 11 is.equipped with parking brakes for user operation as standard. The option of equipping it with drum brakes for operation by an accompanying person is available. The seat surface should always be tensioned to sufficient tautness.
BX 11 BX 11 | Active wheelchair Active wheelchair | 4.7.2 Adjusting the brakes Adjustment of the brakes should be carried out If you notice that the available braking effect is no longer sufficient or by trained specialist staff. However, if you have...
4.9.2. Drive wheels By changing the height of the driving wheel or front wheel, the angle The BX 11 is equipped with 24“ x 1“ drive wheels with pneumatic of the steering wheel axle can also be altered. However, this should tyres as standard.
Pull the washer backwards and move the anti-tip wheel along • Secure the BX 11 against rolling away accidentally by activating the guide to adjust it. The anti-tip wheels are especially recommended the parking brake.
First fold the foot plates up or remove the leg rests. • Move the BX 11 and the current or intended seat together front to front if possible and decelerate the BX 11. Frame and push handles are the only places where •...
BX 11 BX 11 | Active wheelchair Active wheelchair | 6. Technical data Dimensions and weigths Version 1 with Version 2 with Version 1 with Version 2 with leg footrest leg rest Driving characteristics footrest rest Total length with/without Turning circle (mm)
Page 18
A: Suitable as seat in disa- maintenance work. bled vehicle All products approved by B+B for use as seats in vehicles are tested 8.2. Check before use in accordance with ISO 7176-19. The tests in accordance with ISO 7176-19 were performed using restraint systems from AMF-Bruns. The 8.2.1.
A training program is also available for dealers. 11. Storage/shipping B+B customer service is available at +49 (0)700/60007070. If the wheelchair is to be stored or shipped, all attachable and unse- cured parts, apart from the drive wheels, must be removed and packed individually in appropriate cartons.
1 year applies. Date and Stamp Please also observe the B+B care, warranty, hygiene and maintenance instructions. Your qualified mobility dealer will be happy to provide *The serial number is located on the side frame.
Need help?
Do you have a question about the BX 11 and is the answer not in the manual?
Questions and answers