Setting Up - Audi TT Roadster 2016 Owner's Manual

Telephone
- We recommend using the vehicle's Wi-Fi
hotspot when the car phone is in use so that
your mobile phone's apps retain access to
the Internet.

Setting up

Connecting a mobile phone via Bluetooth
Applies to: vehicles with telephone
Fig. 140
PIN display for entry on mobile phone
Important
The vehicle must be stationary, and the ignition
must be switched on.
The Bluetooth function and the discoverability
option of the MMI system
mobile phone must be activated.
The mobile phone you would like to connect must
not be connected actively to any other Bluetooth
device.
The MMI must not be connected to a mobile
phone.
A mini SIM card must not be inserted in the SIM
card reader*.
Connecting a mobile phone
I I
... Select: button
MENU
mobile phone> Continue.
tooth devices will be shown on the infotain­
ment display. Search for the MMI system
Or:
via the Bluetooth device search function on
your mobile phone.
... Select and confirm the desired mobile phone
from the list of Bluetooth devices shown.
l l N ot available in all markets. Applies to mobile phones
with Bluetooth remote SIM Access Profile on vehicles with
Audi connect* and Audi phone box*.
142
215 and the
¢page
>Telephone> Connect
The available Blue­
... The MMI will generate a PIN for the connection
¢Fig. 140.
... Select and confirm
Yes.
... Enter the PIN to establish a connection on your
mobile phone. If the PIN is already being
Or:
displayed on your mobile phone, confirm it on
the phone and on the M MI. You have about 30
seconds to enter the PIN.
... If you wish to connect your mobile phone via
the remote SIM Access Profile, please also en­
ter your SIM card's PIN in the MMI
... Please note any additional system queries on
your mobile phone, e.g. whether the phone
should connect automatically in the future. On
some mobile phones, you may also need to
download the directory and allow access to
your messages separately.
After connecting successfully
After the connection has been established suc­
cessfully, you will be shown a short message con­
taining information on the profiles used to estab­
lish the connection. You can also change the pro­
files afterwards. Select:
left control button>
tings>
nection manager ¢page
In addition, the contacts on the mobile phone are
automatically loaded into the directory of the
MMI. This may take several minutes, depending
on how many contacts are stored on the mobile
phone.
You can configure your vehicle's mobile Wi-Fi
hotspot > and the Audi connect services*
1
159 immediately after connecting an
¢page
rSAP-enabled mobile phone.
ton> right control button>
> right control button >
CD
CAUTION
Please always observe the information ¢0
Wi-Fi hotspot on page 166.
> .
1
button>
Set­
!MENU!
MMI settings> Con­
215.
Select but­
Or:
!TEL!
Connection manager
Wi-Fi settings.
in
_______ �