Table of Contents

Advertisement

Photo Modes

1. Basic Operations of Photo Shooting
a. Turn on video camera to enter recording standby mode;
b. Cast the lens to the subject and preview it on the display;
c. Press the "Shutter" key once to switch the working mode to "photo modes";
d. Press the "Shutter" key again to shoot one photo.
-
The system generates will click to indicate completion and the system will return to photo
shooting standby mode;
-
TFT display under photo shooting mode is shown as below:
(photo shooting)
Remaining number of
shots of memory card
Resolution for photo shooting
2. Parameter Settings for Photo Shooting
Perform the following steps to set the parameters for photo shooting:
a. Press "M" key to enter the setting menu;
b. Press "+" / "-" key to select "
c. Press "<" / ">" key to move blue cursor to the sub-menu you want to configure, Press "OK"
key to enter the sub-menu;
d. Press "<" / ">" key to select the parameters you want;
e. Press "OK" key to confirm;
f. Press "M" key again to exit the setting menu.
• Capture Mode
-
Single Shot Mode (
-
Fast Shot Mode (
are available: 3 p/s, 6 p/s and 8 p/s (photo/second);
-
Continuous Shooting Mode (
per the preset time interval until you press the "Stop" key. The available modes options are
0.5s, 1s, 2s, 3s, 5s, 10s, 20s;
-
Self Timer Mode (
mode, video camera will start countdown and take a photo at the set time. The available
modes options are 3s, 5s, 10s.
• Photo Resolution
Select the required resolution for shooting. You can set this parameter to "8M", "5M" or
"3M".
Working mode
1888 8M
";
): Take one photo when the photo shooting key is pressed;
): video camera takes several photos within one second. three modes
): In this mode, you can shoot photos continuously as
): When the "Shutter" key is pressed once under recording standby
11
aee.com
Battery level
EN
DE
ES
PT
IT
EL
FR
NL
PL
CS
DA
HU
SV
FI
NO
RU

Advertisement

Table of Contents
loading

Table of Contents