To Change Airflow Rate Setting - Daikin CTXU25G2V1B Operation Manual

01_EN_3P232703-1.fm Page 9 Thursday, December 18, 2008 5:51 PM
To change the airflow rate setting
5.
Press "FAN setting" button.
The airflow rate setting is not variable.
• Indoor unit quiet operation
When the airflow is set to "
Use this when making the noise quieter.
• Each pressing of the button advances the airflow rate setting in sequence.
NOTE
Notes on HEAT operation
• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in lower
outdoor temperatures. If the heating effect is insufficient, it is recommended to use another heating appliance in combination with the air
conditioner.
• The heat pump system heats the room by circulating hot air around all parts of the room. After the start of heating operation, it takes
some time before the room gets warmer.
• In heating operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches into defrosting
operation to take away the frost.
• During defrosting operation, hot air does not flow out of indoor unit.
• A pinging sound may be heard during defrosting operation, which, however does not mean that the air conditioner has failures.
Note on COOL operation
• This air conditioner cools the room by blowing the hot air in the room outside, so if the outside temperature is high, the performance of
the air conditioner drops.
Note on DRY operation
• The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically controls
temperature and airflow rate, so manual adjustment of these functions is unavailable.
Notes on AUTO operation
• In AUTO operation, the system selects a temperature setting and an appropriate operation mode (COOL or HEAT) based on the room
temperature at the start of the operation.
• The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.
• If you do not like AUTO operation, manually change the set temperature.
Note on FAN operation
• This mode is valid for fan only.
Note on airflow rate setting
• At smaller airflow rates, the cooling (heating) effect is also smaller.
DRY mode
Five levels of airflow rate setting from "
available.
", the noise from the indoor unit will become quieter.
AUTO or COOL or HEAT or FAN mode
" to " " plus " " and " " are
9