To Change Airflow Rate Setting - Daikin FVXS25BVMB Operation Manual

01_EN_3P098587-1_1.book Page 11 Thursday, December 5, 2002 6:01 PM
I To change the air flow rate setting
5. Press "FAN setting button".
DRY mode
The air flow rate setting is not variable.
• Indoor unit quiet operation
When the air flow is set to "
Use this when making the noise quieter.
The unit might lose power when the fan strength is set to a weak level.
I To change the air flow direction
(page 12.)
NOTE
I I I I Note on HEAT operation
• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating
capacity becomes smaller in lower outdoor temperatures. If the heating effect is insufficient, it is rec-
ommended to use another heating appliance in combination with the air conditioner.
• The heat pump system heats the room by circulating hot air around all parts of the room. After the
start of heating operation, it takes some time before the room gets warmer.
• In heating operation, frost may occur on the outdoor unit and lower the heating capacity. In that case,
the system switches into defrosting operation to take away the frost.
• During defrosting operation, hot air does not flow out of indoor unit.
• At the start of heater operation, so that air does not blow directly on an individual, air blows in an
upward direction. After the blowing air gets warmer, the air will blow according to memorised air flow
direction and rates.
I I I I Note on DRY operation
• The computer chip works to rid the room of humidity while maintaining the temperature as
much as possible. It automatically controls temperature and fan strength, so manual adjust-
ment of these functions is unavailable.
I I I I Note on AUTO operation
• In AUTO operation, the system selects a temperature setting and an appropriate operation mode
(COOL or HEAT) based on the room temperature at the start of the operation.
• The system automatically reselects setting at a regular interval to bring the room temperature to user-
setting level.
• If you do not like AUTO operation, you can manually select the operation mode and setting
you like.
I I I I Note on air flow rate setting
• At smaller air flow rates, the cooling (heating) effect is also smaller.
AUTO or COOL or HEAT or FAN mode
Five levels of air flow rate setting from "
plus " " " " are available.
", the noise from the indoor unit will become quieter.
" to " "
11