ADC Skyrocket MM200F Installation Manual page 6

4
I
NSTALLING
1 Click ,
Start Settings
2 Double-click the
3 Click the
Configuration
4 If Microsoft PPP over ATM Adapter
installed components, skip to the "Connecting to the
Service Provider" section. Otherwise, continue with
the following steps.
5 Click .
Add
6 Do one of the following:
•
For Windows 98 2nd Edition or Windows
2000, in the
dialog, select
the Select Network adapters
•
For Windows ME, in the
Component Type
click
Add
box.
7 In the Manufacturer
8 In the Network Adapters
Protocols box (Windows ME), select
9 When prompted, insert the Windows CD into the CD-ROM drive and click
10 Once the load and configuration is complete, click
M
ICROSOFT
, to open the
Control Panel
icon to open the
Network
tab.
is in the list of
Select Network Component Type
and click
Adapter
box.
Select Network
dialog, select
to open the
Select Network Protocol
box, select Microsoft
box (Windows 98 2nd Edition or Windows 2000) or the
PPP
Control Panel
dialog.
Network
to open
Add
Protocol and
.
Microsoft PPP over ATM Adapter
Yes
OVER
.
and click
to restart your computer.
ATM
Network
OK .
OK .