Ricoh SP C360DNW User Manual page 43

Place the tray on a flat surface.
3. Squeeze the clip on the side paper guide and slide it outward until it stops.
4. Squeeze the end guide and slide it toward the back.
5. Fan envelopes, and then align their edges before loading.
When fanning envelopes, make sure the envelope flaps are not stuck together. If they are stuck
together, separate them.
Before loading envelopes, flatten them out so that their curl does not exceed that shown in the
illustration below.
DSE119
DSE253
CBK239
Loading Envelopes
41