Advertisement
Power Harness
Installation
1. Disconnect negative battery cable
2. Turn the steering wheel as far as possible to the left.
3. Using a straight screwdriver pry out the center portion of the two plastic retainers that secure the rear
portion of passenger's side front fender well. Once the center portion is pried out, remove the outer portion.
Fig. 1
4. Using a Phillips screwdriver unscrew the centers of the other four plastic retainers securing the rear half of
the fender well and then pull out the outer portion. Remove the rear half of the fender well. Fig. 2
5. Remove the fuse box cover under the hood and remove the nut from the main power lug.
6. Connect both the subwoofer and amplifi er power harnesses to the lug and retighten the nut. Torque to
20Nm. Fig. 3
2
Subwoofer Assembly
25A Fuse
Wire Ties x6
M6 Nut
Wire Taps x2
Adapter Harness
Body Harness
Advertisement
