Part Identification Chart - ProForm PFANBE1425.0 User Manual

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST on page 11 of this manual. Note: Some parts may have been
preassembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has
been preassembled.
M10 Large Washer (27)
M10 Washer (20)
M10 Nylon Locknut (19)
M6 Washer (22)
M10 x 20mm Bolt (25)
M6 x 16mm Bolt (24)
M4 x 16mm Screw (28)
5
M6 x 60mm Bolt (17)
M10 x 63mm Carriage Bolt (18)
M10 x 63mm Bolt (16)
M10 x 70mm Bolt (26)
M10 x 85mm Bolt (23)