Displaying The Service Instances With Mac Security Enabled On A Specific Bridge Domain - Cisco NCS 4200 Series Configuration Manual

Displaying the Service Instances with MAC Security Enabled on a Specific Bridge Domain

Displaying the Service Instances with MAC Security Enabled on a Specific
Bridge Domain
Perform this task to display the service instances on a specific bridge domain that have MAC security enabled.
SUMMARY STEPS
1. enable
2. show bridge-domain id
3. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2 show bridge-domain id
Example:
Device# show bridge-domain 100 mac security
Step 3 end
Example:
Device# end
Showing the MAC Addresses of All Secured Service Instances
SUMMARY STEPS
1. enable
2. show ethernet service instance mac security address
3. show mac address-table secure
4. end
Layer 2 Configuration Guide for Cisco NCS 4200 Series
60
Configuring MAC Address Security on Service Instances and EVC Port Channels
mac security
Purpose
Enables privileged EXEC mode.
Displays all the service instances with MAC security
mac security
enabled on a specific bridge domain.
Returns to user EXEC mode.
• Enter your password if prompted.