Clearing All Dynamically Learned Secure Mac Addresses On A Service Instance - Cisco NCS 4200 Series Configuration Manual

Configuring MAC Address Security on Service Instances and EVC Port Channels
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 show bridge-domain bridge-id
violation
Example:
Device# show bridge-domain 100 mac security
last violation
Step 3 end
Example:
Device# end
Clearing All Dynamically Learned Secure MAC Addresses on a Service
Instance
Perform this task to clear all dynamically learned Secure MAC addresses on a service instance.
SUMMARY STEPS
1. enable
2. clear ethernet service instance id id
3. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable

Clearing All Dynamically Learned Secure MAC Addresses on a Service Instance

Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
mac security last Displays information about the last violation recorded on
each of the service instances that belong to the bridge
domain.
Returns to user EXEC mode.
interface type number
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Layer 2 Configuration Guide for Cisco NCS 4200 Series
mac table
65