Configuring MAC Address Security on Service Instances and EVC Port Channels
Command or Action
Step 2
show ethernet service instance id id
number
Example:
Device# show ethernet service instance id 100
interface gigabitethernet1/1 mac security
Step 3
end
Example:
Device# end
Displaying the Service Instances with MAC Security Enabled
Perform this task to display all the service instances with MAC security enabled.
SUMMARY STEPS
1. enable
2. show ethernet service instance mac security
3. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
show ethernet service instance mac security
Example:
Device# show ethernet service instance mac
security
Step 3
end
Example:
Device# end
mac security
Displaying the Service Instances with MAC Security Enabled
Purpose
interface type
Displays the MAC security status of a specific
service instance.
Returns to user EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays all the service instances with MAC security
enabled.
Returns to user EXEC mode.
Layer 2 Configuration Guide for Cisco NCS 4200 Series
59