Using Dial Up Connections - Verizon Wireless V620 User Manual

This message will display each time you go to connect via the Quick 2 Net (14.4 kbps) connection, until you select "Do
not show this warning again".
Dial-Up
The first time you connect via a wireless Dial-Up connection, the following warning message will be displayed:
ATTENTION
Dial Up connections may be charged differently than NationalAccess sessions.
Please check your Calling Plan for details.
This message will display each time you go to connect via a wireless Dial-Up connection, until you select "Do not show
this warning again".
Wi-Fi
The first time you connect to a Wi-Fi network, you will see the following warning
You are about to establish a connection to a Wi-Fi network. Verizon Wireless
does not support problems associated with Wi-Fi networks.
Verizon Wireless Customer Care will not be able to assist you. Please see the
Help file for details.
In most cases connecting to a private Wi-Fi network is a simple process and you can use VZAccess Manager instead of
the Wi-Fi client you would normally use. If you have any problems doing this try the recommendations in the section on
Wi-Fi Troubleshooting.

4.5 USING DIAL UP CONNECTIONS

This section is only applicable if you are using a WWAN Device that supports Dial-Up connections (a
wireless phone and cable or a PC Card).
You can make wireless copies of existing dial up accounts on your system. This will wirelessly enable them and allow you
to connect to them wirelessly.
To launch the copy utility, select "Options", "Dial-up Accounts" then "Copy".
Click on the connection or connections you want to copy and click on the "OK" button.
22
Revision 7/7/05