Part Identification Chart - ProForm 831.288070 User Manual

PART IDENTIFICATION CHART

Use the chart below for help identifying the small
parts used in assembly. The number in parenthesis
below each part refers to the key number of the part.
The second number refers to the quantity used in
M10 x 25mm Button Screw (8)Ð5
M4 x 12mm Console Screw (4)Ð4
M8 Split Washer (49)Ð4
assembly. Note: Some parts may have been pre-
attached for shipping purposes. If a part is not
found in the parts bag, check to see if it has been
pre-attached.
M8 x 90mm Carriage Bolt (30)Ð4
M4 x 16mm Screw (9)Ð1
M10 Split Washer (41)Ð5
5
M8 Nylon Locknut (21)Ð8