Telephone Base Installation - VTech CS6114 User Manual

Getting started Getting started

Telephone base installation

Install the telephone base as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a
ID problems caused by DSL interference. Contact your DSL service provider
Telephone
wall jack
required if you have DSL
high-speed Internet service
• Use only the power adapter supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
1 (800) 267-7377.
•
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Telephone
line cord
Telephone base
2
Electrical outlet
(not controlled
by a wall switch)
Telephone base
power adapter