Telephone Operation - VTech CS6114 User Manual

Telephone operation

Make a call
• Press /
FLASH
telephone number.
Predial a call
• Enter the telephone number using the dialing keys (0-9), then press
/ to dial.
FLASH
Answer a call
• Press /
FLASH
• The screen shows the elapsed time as you talk (in hours, minutes and
seconds).
• When predialing (preview numbers before dialing), press REMOVE or
/CLEAR to backspace and delete; press and hold
OFF
a dialing pause (a P appears).
• If the handset is moved out of range while on a call, it will beep
End a call
• Press OFF/
CLEAR
Volume
• During a call, press
Share an outside call
You can use up to two system handsets at a time on an outside call.
• When a handset is already on a call and you would like to join the call, press
/ on another handset to join the call.
FLASH
• To end the call, press OFF/
or charger. The call will not end until all handsets hang up.
• This feature is only applicable to model CS6114-2.
Call waiting
When you subscribe to call waiting service from your telephone service
provider, you hear an alert tone if there is an incoming call while you are on
another call.
• Press /FLASH to put the current call on hold and take the new call.
• Press /FLASH at any time to switch back and forth between calls.
and then use the dialing keys (0-9) to dial the
or any of the dialing keys (0-9,
.
or put the handset to the telephone base or charger.
CID/ or
VOL -
CLEAR
TONE
/ to adjust the listening volume.
VOL +
or place the handset in the telephone base
14
#
or ).
/PAUSE to insert
REDIAL
three times